| Caterpillar 148-4736 Aftermarket Hydraulic Final Drive Motor | B1:58 mm; Brand:NTN; Precision class:P0; Manufacturer Name:NTN; F:22 mm; B2:36.5 mm; Min operating temperature, Tmin:-20 °C; Minimum Buy Quantity:N/A; Category:Bearings; n:6 mm; |
| Caterpillar 236 1-spd Reman Hydraulic Final Drive Motor | r1a max:2 mm; Mass (without HJ ring):5.3 kg; Characteristic outer ring frequency, BPF0:5.19 Hz; Category:Roller Bearings; d:75 mm; da max:93 mm; Brand:NTN; Nlim (oil):4,100 rpm; Characteristic rolling element frequency, BSF:4.76 Hz; Characteristic inner ring frequency, BPFI:7.81 Hz; |
| Caterpillar 127-5830 Hydraulic Final Drive Motor | L1:21 mm; H:33.3 mm; d:15.88 mm; B:31 mm; A:38 mm; Designation of bearing:UC202-10G2T04; J:49 mm; T min.:-40 °C; Designation of housing:PG204-; s1:15.5 mm; |
| Caterpillar 227-6913 Hydraulic Final Drive Motor | Dynamic load, C:12.8 kN; f0:13.2; Da max:42 mm; Characteristic cage frequency, FTF:0.38 Hz; Radial clearance class:C3; Static load, C0:6.65 kN; Enclosure:2 Seals; Minimum Buy Quantity:N/A; Fatigue limit load, Cu:0.3 kN; Characteristic inner ring frequency, BPFI:4.92 Hz; |
| Caterpillar 199-4715 Hydraulic Final Drive Motor | N:14mm; A2:51.3 mm; T min.:-20 °C; A:34 mm; Dz:80 mm; d:35 mm; C:25.7 kN; Designation of bearing:EX207G2T20; C0:15.2 kN; Designation of housing:F207N-; |
| Caterpillar 246B 1-Spd Reman Hydraulic Final Drive Motor | C:62 kN; A:44 mm; B:74.6 mm; d:69.85 mm; H:150 mm; Recommended tightening torque for set screw:27.1 Nm; G:M6x1; SW:5.56 mm; S:30.2 mm; s1:37.3 mm; |
| Caterpillar 107-2864 Reman Hydraulic Final Drive Motor | Precision class:P42; d:40 mm; Dynamic load, C:13.7 kN; Characteristic outer ring frequency, BPF0:8.43 Hz; Db max:59.5 mm; D6:48.1 mm; Max operating temperature, Tmax:120 °C; Preload value:0.137 kN; D2:57.7 mm; Nlim (grease):19,900 rpm; |
| Caterpillar 209-6663 Hydraulic Final Drive Motor | B:20 mm; Category:Roller Bearings; Max operating temperature, Tmax:120 °C; db min:40 mm; Product Group:B04144; Weight / Kilogram:0.259; Static load, C0:50 kN; Nlim (oil):11,000 rpm; E:55.5 mm; ra max:1 mm; |