| Caterpillar 096-4366 Hydraulic Final Drive Motor | da min:81 mm; Fatigue limit load, Cu:26.3 kN; Nlim (oil):5,000 rpm; d1:98 mm; r1s min:2.1 mm; Characteristic outer ring frequency, BPF0:5.21 Hz; Radial clearance class:C4; rs min:2.1 mm; E:133 mm; Product Group:B04144; |
| Caterpillar 114-8222 Hydraulic Final Drive Motor | d:40 mm; da max:51 mm; B:18 mm; Fatigue limit load, Cu:0.81 kN; D:80 mm; Static load, C0:17.8 kN; ra max:1 mm; f0:14; Nlim (grease):8,700 rpm; Characteristic outer ring frequency, BPF0:3.61 Hz; |
| Caterpillar 107-2864 Reman Hydraulic Final Drive Motor | Precision class:P42; d:40 mm; Dynamic load, C:13.7 kN; Characteristic outer ring frequency, BPF0:8.43 Hz; Db max:59.5 mm; D6:48.1 mm; Max operating temperature, Tmax:120 °C; Preload value:0.137 kN; D2:57.7 mm; Nlim (grease):19,900 rpm; |
| Caterpillar 081-3224 Reman Hydraulic Final Drive Motor | Seal Type:Single Lip; Expansion Type:Non-Expansion; Retainer Type:Std Retainer; Self Aligning:Self Centering; Ship Weight:17.9 LB; Bearing Series:215 Series; Ball Bearing Housing Series:215 Series; Manufacturing Plant Location:Rogersville, TN; Ring Size:Standard; Housing Type:2 Bolt Pillow Block; |
| Caterpillar 240-8750 Hydraulic Final Drive Motor | D:130 mm; Dynamic load, C:56.9 kN; Mass:0.89 kg; Characteristic inner ring frequency, BPFI:11.7 Hz; Max operating temperature, Tmax:120 °C; Contact angle α:25 °; ra max:1 mm; Da max:123 mm; Fatigue limit load, Cu:3 kN; D1:115.7 mm; |
| Caterpillar 163-9757 Hydraulic Final Drive Motor | Designation of housing:PG208N-; A:54 mm; Recommended tightening torque for set screw:8 Nm; Designation of open end cover:SCOU208-24; H:49.2 mm; L1:35 mm; A1:30 mm; Weight:1.85 kg; C:29.6 kN; Z:69.3 mm; |
| Caterpillar 109-0833 Hydraulic Final Drive Motor | T max.:200 °C; L1:47 mm; N1:22 mm; C:19.5 kN; s1:19.05 mm; Weight:1.1 kg; C0:11.2 kN; H2:82 mm; N:14mm; A1:25 mm; |
| Caterpillar 142-8720 Reman Hydraulic Final Drive Motor | Fatigue limit load, Cu:7.6 kN; Dynamic load, C:58 kN; d:40 mm; Brand:NTN; Weight / Kilogram:0.52; da min:46.5 mm; Da max:73.5 mm; Min operating temperature, Tmin:-40 °C; Product Group:B04144; Nlim (oil):10,000 rpm; |