| Caterpillar 114-8222 Hydraulic Final Drive Motor | d:40 mm; da max:51 mm; B:18 mm; Fatigue limit load, Cu:0.81 kN; D:80 mm; Static load, C0:17.8 kN; ra max:1 mm; f0:14; Nlim (grease):8,700 rpm; Characteristic outer ring frequency, BPF0:3.61 Hz; |
| Caterpillar 252B3 1-Spd Reman Hydraulic Final Drive Motor | Rolling Element:Cylindrical Roller B; Fatigue limit load, Cu:37.8 kN; Static load, C0:360 kN; Nlim (oil):3,700 rpm; Nlim (grease):3,100 rpm; Snap Ring:No; Characteristic inner ring frequency, BPFI:8.27 Hz; r1a max:2.5 mm; Max operating temperature, Tmax:120 °C; |
| Caterpillar 227-6044 Reman Hydraulic Final Drive Motor | H:57.2 mm; C:35.1 kN; Dz:100 mm; Designation of closed end cover:SCC210; G:M6x1; N:20mm; C0:23.2 kN; H2:114 mm; Designation of housing:P210N-; N1:25 mm; |
| Caterpillar 171-9329 Aftermarket Hydraulic Final Drive Motor | Nlim (grease):4,700 rpm; da min:98 mm; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.43 Hz; Static load, C0:49.5 kN; Nlim (oil):5,600 rpm; Characteristic inner ring frequency, BPFI:7.92 Hz; Mass:1.02 kg; d:90 mm; Dynamic load, C:58 kN; |
| Caterpillar 10R-6129 Reman Hydraulic Final Drive Motor | S:18.8 mm; d:35 mm; Weight:1.66 kg; Designation of open end cover:SCOE207-35; Z:78.6 mm; d1:51.1 mm; H1:13 mm; L:110 mm; J:80 mm; A1:27 mm; |
| Caterpillar 1G-3510 Reman Hydraulic Final Drive Motor | Characteristic cage frequency, FTF:0.4 Hz; Mass:0.46 kg; D1:70.5 mm; Nlim:5,800 rpm; ra max:1 mm; Characteristic inner ring frequency, BPFI:5.39 Hz; d:40 mm; D:80 mm; f0:14; Static load, C0:17.9 kN; |
| Caterpillar 10R-3335 Reman Hydraulic Final Drive Motor | T max.:100 °C; G:M6x1; s1:11 mm; A:25.5 mm; A2:26 mm; H3:62; C:9.55 kN; A4:20.5 mm; Z:20.2 mm; Recommended tightening torque for set screw:3.5 Nm; |
| Caterpillar 262 1-Spd Reman Hydraulic Final Drive Motor | C0:15.2 kN; H:98 mm; L1:225 mm; S:9.5 mm; Designation of bearing:ES207-23G2T20; A:21 mm; T min.:-20 °C; G:R1/8"; SW:3.97 mm; L:274 mm; |