| Caterpillar 227-6187 Hydraulic Final Drive Motor | D1:54.3 mm; Characteristic inner ring frequency, BPFI:8.26 Hz; b:4.4 mm; Static load, C0:60.2 kN; Nlim:14,000 rpm; Da max:56.4 mm; Characteristic outer ring frequency, BPF0:5.74 Hz; da min:35.6 mm; Max operating temperature, Tmax:200 °C; Dynamic load, C:71.9 kN; |
| Caterpillar 096-4366 Hydraulic Final Drive Motor | da min:81 mm; Fatigue limit load, Cu:26.3 kN; Nlim (oil):5,000 rpm; d1:98 mm; r1s min:2.1 mm; Characteristic outer ring frequency, BPF0:5.21 Hz; Radial clearance class:C4; rs min:2.1 mm; E:133 mm; Product Group:B04144; |
| Caterpillar 10R-6127 Reman Hydraulic Final Drive Motor | T min.:-20 °C; C:43.55 kN; G:R1/8"; T max.:200 °C; H:222 mm; d:55 mm; S:12 mm; A:45.8 mm; e:28 mm; Designation of housing:FLE211-; |
| Caterpillar 081-4000 Reman Hydraulic Final Drive Motor | Nlim (grease):10,000 rpm; Min operating temperature, Tmin:-25 °C; Characteristic rolling element frequency, BSF:3.52 Hz; Da max:45.5 mm; Mass:0.14 kg; ra max:1 mm; D:52 mm; d:20 mm; f0:12.4; Characteristic outer ring frequency, BPF0:2.57 Hz; |
| Caterpillar 267-6825 Hydraulic Final Drive Motor | H1:16 mm; B1:51.1 mm; N:14mm; C:25.7 kN; G:M6x1; Recommended tightening torque for set screw:8 Nm; B:37.6 mm; H:46.2 mm; s1:36.3 mm; H2:91.5 mm; |
| Caterpillar 114-1477 Hydraulic Final Drive Motor | T min.:-20 °C; A5:56.3 mm; C:96 kN; d:90 mm; s1:48 mm; SW:6 mm; Recommended tightening torque for set screw:33 Nm; B:96 mm; Designation of bearing:UC218G2L3; C0:71.5 kN; |
| Caterpillar 252 1-Spd Reman Hydraulic Final Drive Motor | Max Bearing Speed:4500 rpm; Retainer Type:Std Retainer; Anti-Rotation Pin:Yes; Seal Type:Single Lip; Self Aligning:Self Centering; Bearing Duty:Intermediate Duty; Housing Type:2 Bolt Pillow Block; Housing Material:Cast Iron; d:50.0000 mm; Ball Bearing Housing Series:210 Series; |
| Caterpillar 227-6132 Hydraulic Final Drive Motor | D:72 mm; Characteristic rolling element frequency, BSF:4.61 Hz; da min:41.5 mm; Radial clearance class:CN; ra max:1 mm; Characteristic inner ring frequency, BPFI:5.44 Hz; Nlim (grease):9,800 rpm; Static load, C0:15.3 kN; Da max:65.5 mm; f0:13.8; |