| Caterpillar 262B 2-Spd Reman Hydraulic Final Drive Motor | Flinger Type:Rubberized; Seal Type:Single Lip; Anti-Rotation Pin:Yes; Housing Material:Cast Iron; Retainer Material:Nylon; Base to Center Height:Not Applicable; Retainer Type:Std Retainer; Bearing Series:212 Series; UPC:782475881857; Expansion Type:Non-Expansion; |
| Caterpillar 232B2 1-spd Reman Hydraulic Final Drive Motor | J:82.5 mm; d:30.16 mm; G:R1/8"; Weight:1.2 kg; B1:48.3 mm; A1:12 mm; d1:44.1 mm; A2:50.1 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:FE206-; |
| Caterpillar 246B 2-Spd Reman Hydraulic Final Drive Motor | C0:7.88 kN; Designation of bearing:UC205-15G2; G:R1/8"; A:29.3 mm; N:11,5mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; A1:11 mm; s1:17 mm; d:23.81 mm; |
| Caterpillar 227-6187 Hydraulic Final Drive Motor | D1:54.3 mm; Characteristic inner ring frequency, BPFI:8.26 Hz; b:4.4 mm; Static load, C0:60.2 kN; Nlim:14,000 rpm; Da max:56.4 mm; Characteristic outer ring frequency, BPF0:5.74 Hz; da min:35.6 mm; Max operating temperature, Tmax:200 °C; Dynamic load, C:71.9 kN; |
| Caterpillar 194-6469 Hydraulic Final Drive Motor | Dynamic load, C:6 kN; B:8.73 mm; Min operating temperature, Tmin:-25 °C; rs min:0.8 mm; Radial clearance class:CN; Da max:30.4 mm; D:34.92 mm; ra max:0.8 mm; Max operating temperature, Tmax:110 °C; Brand:NTN; |
| Caterpillar 215-9982 Hydraulic Final Drive Motor | Radial clearance class:CN; D1:45.5 mm; Min operating temperature, Tmin:-20 °C; da max:30 mm; Characteristic inner ring frequency, BPFI:4.43 Hz; rs min:1.1 mm; Da max:45.5 mm; Brand:SNR; d1:30 mm; Mass:0.2 kg; |
| Caterpillar 161-4209 Hydraulic Final Drive Motor | Characteristic outer ring frequency, BPF0:4.12 Hz; Max operating temperature, Tmax:120 °C; Static load, C0:1.46 kN; Radial clearance class:CN; D4 max:26.8 mm; Characteristic cage frequency, FTF:0.41 Hz; b min:0.8 mm; Characteristic inner ring frequency, BPFI:5.88 Hz; Nlim (grease):27,000 rpm; Ca min:1.6 mm; |
| Caterpillar 107-2864 Reman Hydraulic Final Drive Motor | Precision class:P42; d:40 mm; Dynamic load, C:13.7 kN; Characteristic outer ring frequency, BPF0:8.43 Hz; Db max:59.5 mm; D6:48.1 mm; Max operating temperature, Tmax:120 °C; Preload value:0.137 kN; D2:57.7 mm; Nlim (grease):19,900 rpm; |