| Caterpillar 266-6397 Hydraulic Final Drive Motor | Housing Series:203 SERIES (202 - 20; Shaft Attachment Type:TYPE C; Bearing Series:203 Series; UPC:782475055098; Brand:Baldor-Dodge; Ship Weight:49 LB; d:2.0000 in; Grease Type:Mobilgrease XHP222; Bearing Insert Material:Steel; Expansion Type:Non-Expansion; |
| Caterpillar 1R-5476 Hydraulic Final Drive Motor | N:18mm; Designation of bearing:US212-39G2; A1:50.8 mm; Weight:5.24 kg; d:61.91 mm; A:79.4 mm; H:68.3 mm; H2:138.1 mm; T min.:-20 °C; Z:96.4 mm; |
| Caterpillar 199-4557 Hydraulic Final Drive Motor | C0r:137 kN; Nlim (grease):1,900 rpm; Min operating temperature, Tmin:-20 °C; Radial clearance class:CN; e:55 mm; C:30 mm; Brand:NTN; Bearing with/without cage:Sans; Lw:11 mm; Max operating temperature, Tmax:120 °C; |
| Caterpillar 171-9329 Aftermarket Hydraulic Final Drive Motor | Nlim (grease):4,700 rpm; da min:98 mm; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.43 Hz; Static load, C0:49.5 kN; Nlim (oil):5,600 rpm; Characteristic inner ring frequency, BPFI:7.92 Hz; Mass:1.02 kg; d:90 mm; Dynamic load, C:58 kN; |
| Caterpillar 201-7117 Hydraulic Final Drive Motor | Recommended tightening torque for set screw:22 Nm; C:43.55 kN; H1:14 mm; A1:33 mm; L:140 mm; J:104 mm; Designation of bearing:UC211G2; d:55 mm; Weight:3.12 kg; B:55.6 mm; |
| Caterpillar 252B3 1-Spd Reman Hydraulic Final Drive Motor | Rolling Element:Cylindrical Roller B; Fatigue limit load, Cu:37.8 kN; Static load, C0:360 kN; Nlim (oil):3,700 rpm; Nlim (grease):3,100 rpm; Snap Ring:No; Characteristic inner ring frequency, BPFI:8.27 Hz; r1a max:2.5 mm; Max operating temperature, Tmax:120 °C; |
| Caterpillar 136-2808 Hydraulic Final Drive Motor | Min operating temperature, Tmin:-20 °C; Da max:63 mm; Static load, C0:11.5 kN; Brand:SNR; Characteristic rolling element frequency, BSF:6.68 Hz; Characteristic cage frequency, FTF:0.43 Hz; D1:62.5 mm; Characteristic outer ring frequency, BPF0:5.12 Hz; Nlim:5,900 rpm; D:68 mm; |
| Caterpillar 199-4575 Hydraulic Final Drive Motor | Nlim:5,100 rpm; Da max:151 mm; da max:105 mm; Fatigue limit load, Cu:25 kN; Dynamic load, C:183 kN; D:160 mm; r1s min:2 mm; Radial clearance class:CN; Characteristic inner ring frequency, BPFI:9.78 Hz; Characteristic cage frequency, FTF:0.42 Hz; |