No. | Brand | C | D | F | d | B | A2 | PG | R1 |
SY200 | Sany | - | - | - | - | - | - | - | - |
SY265 | Sany | - | - | - | - | - | - | - | - |
SY210 | Sany | - | - | 105 mm | 95 mm | 36 mm | - | - | - |
215 | Sany | - | 130 mm | - | - | - | - | - | - |
SY205 | Sany | 55.5 | - | - | - | - | - | - | - |
SY215 | Sany | 3.3 | - | - | 6 | - | - | - | - |
SY185 | Sany | - | - | - | - | - | - | 1/4 NPT | 79.375 mm |
ST235C | Sany | - | - | - | - | - | 165.1 mm | - | - |
Sany 215 Hydraulic Final Drive Motor | Db min.:125 mm; Basic static load rating C0:228 kN; D:130 mm; Dimension series:M 716600; Calculation factor e:0.44; Fatigue load limit Pu:26 kN; Basic dynamic load rating C:172 kN; Calculation factor Y0:0.8; r1,2 min.:3 mm; rb max.:2.5 mm; |
Sany SY265 Hydraulic Final Drive Motor | SRI:0.67; hidYobi:MR137ZZ; D_:13; SRE:0.67; r1:0.15; LangID:1; DI_:9.1; db:9; SREX:0.02; Prod_Type3:ESM_MD_ZZ; |
Sany SY210 Hydraulic Final Drive Motor | F:105 mm; Mass inner ring:0.43 kg; r, r1,2 min.:1 mm; d:95 mm; B:36 mm; |
Sany SY215 Hydraulic Final Drive Motor | D_:22; C:3.3; C0:1.37; DA_:3.969; d:6; B1:7; Prod_Type3:ESM_MD_DD; LangID:1; KBRG:619; B_:7; |
Sany SY205 Hydraulic Final Drive Motor | ALPHA_:0; DI_:49.5; dc min:52; Macha rpm:11000; C:55.5; hidYobi:NUP208EM; B_:18; yobi:NUP208EM; D_:80; D_a max:73.5; |
Sany ST235C Hydraulic Final Drive Motor | P120°:11.1 kN; P60°:28.9 kN; J max.:177.8 mm; P90°:17.3 kN; Mass pillow block:6.19 kg; Cap bolt:2 x 7/16-14 UNC; A2:165.1 mm; Taconite seal:TER 20; End plug (suffix Y):EPR 4; Stabilizing ring:SR-10-0; |
Sany SY200 Hydraulic Final Drive Motor | Minimum load factor A:0.026; H1:46 mm; Limiting speed:3800 r/min; Reference speed:2800 r/min; Basic static load rating C0:65.5 kN; Mass bearing (including seat washer where applicable):0.58 kg; da:30 mm; ra max.:1 mm; D3:62 mm; Fatigue load limit Pu:2.4 kN; |
Sany SY185 Hydraulic Final Drive Motor Video