| 68657A Franke Slewing Ring Bearings | Configuration:Double Row; Limiting Speed - Oil:600 rpm; Nr. of Holes:8; ra (max):6 mm; Limiting Speed - Grease:480 rpm; Fillet Radius/Chamfer:7.5 mm; Weight:550.000 kg; Roller Profile:Symmetric; d:460 mm; Axial Load Factor Y2:2.52; Radial Clearance:0.260 to 0.410 mm; Hole Diameter (do):20 mm; Da (max):724 mm; Groove Width A:45 mm; D:760 mm; Axial Load Factor Y1:1.69; Bore Type:Cylindrical Bore; da (min):496 mm; |
| 68542A Franke Slewing Ring Bearings | Dimension L:22.0 in; Cr - Dynamic Load Rating:94869 lbf; Seal Type:High Temperature Pac; Dimension H:7.126 in; Bearing - Housing - Seal UPC:013992094681; Housing Width:6.5 in; Dimension M:7.0 in; Maximum Speed:1570 rpm; Bearing Number:LSE503BR; Shaft Size:5-3/16 in; Bolt Size:4 x M24; Support Type:Four-Bolt Plummer Bl; Cor - Static Load Rating:131513 lbf; Dimension J:19.0 in; Weight:204 lb; Note:This product line wa; |
| 74124A Franke Slewing Ring Bearings | Dynamic Load Rating:14,200 N; Weight:0.090 kg; Bore Type:Cylindrical Bore; d:17 mm; Fillet Radius/Chamfer:0.6 mm; B:17.5 mm; Da:35 mm; D:40 mm; da:22 mm; Limiting Speed - Oil:11,000 rpm; Radial Clearance:0.011 to 0.025 mm; Static Load Rating:8,800 N; Enclosure:Double Shield; Configuration:Double Row; ra:0.6 mm; |
| 68524A Franke Slewing Ring Bearings | Ce - Dynamic Radial Rating1:15900 N; r - Outer Ring To Clear Radius3:0.6 mm; D:68.000 mm; do - Ball Diameter:6.350 mm; R - Inner Ring To Clear Radius2:0.6 mm; da - Inner Ring Backing Diameter:50.100 mm; Ball Type:STEEL; d:45 mm; Cage Type:CR - Phenolic Outer; C0 - Static Radial Rating:12500 N; Bearing Width:12 mm; Bearing Weight:0.13 Kg; Limiting Speed (Grease):18000 rpm; Limiting Speed (Oil):36000 rpm; |
| 68694A Franke Slewing Ring Bearings | Radial Clearance:0.020 to 0.045 mm; Enclosure:Open; Bore Type:Cylindrical Bore; Dynamic Load Rating:12,600 N; Fillet Radius/Chamfer:0.6 mm; Db (min):34 mm; dd (min):25 mm; d:17 mm; Limiting Speed - Grease:16,000 rpm; ra1 (max):0.3 mm; r1:0.3 mm; dc (min):24 mm; Static Load Rating:7,950 N; Outside Ring Inside Diameter:33.9 mm; da (min):22 mm; Da (max):35 mm; Configuration:Single Row; Limiting Speed - Oil:19,000 rpm; |
| 68715A Franke Slewing Ring Bearings | Weight:46.800 kg; db (max):195 mm; da (min):162 mm; Static Load Rating:1,020,000 N; ra (max):4 mm; D:360 mm; Limiting Speed - Oil:2,000 rpm; db (min):162 mm; Db (max):304 mm; Fillet Radius/Chamfer:5 mm; ra1 (max):4 mm; d:140 mm; Db (min):338 mm; r1:5 mm; dc (min):200 mm; Dynamic Load Rating:875,000 N; B:82 mm; Da (max):338 mm; Limiting Speed - Grease:1,700 rpm; Bore Type:Cylindrical Bore; |
| 77250B Franke Slewing Ring Bearings | da - Cone Frontface Backing Diameter:38.61 mm; Y - ISO Factor9:1.44; r - Cup Backface To Clear Radius2:1.52 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; Cg - Geometry Factor:0.0681; Da - Cup Frontface Backing Diameter:62.00 mm; G2 - Heat Generation Factor (Rib-Roller End):8.48; e - ISO Factor8:0.42; Ab - Cage-Cone Frontface Clearance:3.3 mm; Series:02400; Cage Type:Stamped Steel; |
| 74140A Franke Slewing Ring Bearings | Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)5:22400 lbf; C0 - Static Radial Rating:19900 lbf; G1 - Heat Generation Factor (Roller-Raceway)10:22.9; Da - Cup Frontface Backing Diameter:3.40 in; da - Cone Frontface Backing Diameter:2 in; Bearing Weight:1.6 lb; C1 - Cup Flange Width:0.2187 in; G2 - Heat Generation Factor (Rib-Roller End):8.71; r - Cup Backface To Clear Radius2:0.06 in; |
| 10-16 0200/0-0801 IMO Slewing Ring Bearings | Fillet Radius/Chamfer:1.1 mm; B:18 mm; Weight:0.540 kg; Enclosure:Double Shield; da (min):96 mm; Factor fo:16.4; Bore Type:Cylindrical Bore; Da (max):119 mm; d:90 mm; Dynamic Load Rating:33,000 N; ra (max):1 mm; Configuration:Single Row; D:125 mm; Radial Clearance:0.030 to 0.058 mm; Limiting Speed - Grease:5,100 rpm; Static Load Rating:31,500 N; |
| 74108A Franke Slewing Ring Bearings | Thread D12:Tr560x6; L1:394 mm; d1:500.00 mm; Appropriate Hydraulic Nut:HMV112; Weight:89.90 Kg; t:15 mm; e:9.0 mm; Ro:G1/4; Appropriate Withdrawal Nut No.:HM31/560; b:35 mm; |