| Caterpillar 199-5148 Hydraulic Final Drive Motor | Static load, C0:39 kN; Brand:NTN; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:5.12 Hz; EAN:4547359512007; Minimum Buy Quantity:N/A; Y2:2.26; d:15.88 mm; e:0.27; Min operating temperature, Tmin:-40 °C; |
| Caterpillar 209-6663 Hydraulic Final Drive Motor | B:20 mm; Category:Roller Bearings; Max operating temperature, Tmax:120 °C; db min:40 mm; Product Group:B04144; Weight / Kilogram:0.259; Static load, C0:50 kN; Nlim (oil):11,000 rpm; E:55.5 mm; ra max:1 mm; |
| Caterpillar 199-4575 Hydraulic Final Drive Motor | Nlim:5,100 rpm; Da max:151 mm; da max:105 mm; Fatigue limit load, Cu:25 kN; Dynamic load, C:183 kN; D:160 mm; r1s min:2 mm; Radial clearance class:CN; Characteristic inner ring frequency, BPFI:9.78 Hz; Characteristic cage frequency, FTF:0.42 Hz; |
| Caterpillar 236B3 2-spd Reman Hydraulic Final Drive Motor | B:85.7 mm; C:83.2 kN; Designation of bearing:UC217G2L3; s1:42.85 mm; Recommended tightening torque for set screw:33 Nm; SW:6 mm; A5:51.6 mm; T min.:-20 °C; C0:63.8 kN; T max.:100 °C; |
| Caterpillar 081-4000 Reman Hydraulic Final Drive Motor | Nlim (grease):10,000 rpm; Min operating temperature, Tmin:-25 °C; Characteristic rolling element frequency, BSF:3.52 Hz; Da max:45.5 mm; Mass:0.14 kg; ra max:1 mm; D:52 mm; d:20 mm; f0:12.4; Characteristic outer ring frequency, BPF0:2.57 Hz; |
| Caterpillar 246B 1-Spd Reman Hydraulic Final Drive Motor | C:62 kN; A:44 mm; B:74.6 mm; d:69.85 mm; H:150 mm; Recommended tightening torque for set screw:27.1 Nm; G:M6x1; SW:5.56 mm; S:30.2 mm; s1:37.3 mm; |
| Caterpillar 107-2865 Reman Hydraulic Final Drive Motor | Characteristic cage frequency, FTF:0.4 Hz; Min operating temperature, Tmin:-20 °C; D1:92.5 mm; ra max:2 mm; Characteristic outer ring frequency, BPF0:5.22 Hz; Characteristic inner ring frequency, BPFI:7.78 Hz; Brand:SNR; Radial clearance class:C3; Characteristic rolling element frequency, BSF:4.86 Hz; Dynamic load, C:165 kN; |
| Caterpillar 191-2592 Hydraulic Final Drive Motor | d:60 mm; Recommended tightening torque for set screw:22 Nm; s1:26.85 mm; S:14.9 mm; A5:38.8 mm; T min.:-20 °C; T max.:100 °C; Designation of bearing:US212G2; P:300 mm; SW:5 mm; |